At HBI, we offer comprehensive and tailored Third Party Inspection & Supervision services. We always try to remain ahead of your expectations.
INDUSTRIAL INSPECTION
- Pressure Vessels (API – 510)
- Piping (API – 570)
- Risk Based Inspection (API – 580)
- Above Ground Storage Tank (API – 653)
- Refractory Personnel (API – 936)
- Phased Array Ultrasonic Testing (PAUT)
- Time-of-Flight Diffraction (TOFD)
- Eddy Current Testing (ECT)
- Acoustic Emission Testing (AET)
- Digital Radiography (DR)
- Ultrasonic Testing (UT)
- Magnetic Particle Testing (MPT)
- Liquid Penetrant Testing (LPT)
- Radiographic Testing (RT)
- Visual Inspection (VI)
- Hardness Testing
- Holiday Testing (Brush & Ring both)
CIVIL STRUCTURES VIBRATION ASSESSMENT SERVICES
Assessing the structural health of civil structures presents unique challenges, and vibration testing emerges as a reliable solution.
- Monitoring vibration in steel structures
- Conducting transient analysis of bridges’ structural response
- Assessing floor/ground vibrations.
- .Implementing structural isolations to mitigate vibrations
- Providing effective vibration mitigation solutions
- Installing vibration barriers to arrest vibration energy transmission.
- Studying the impact of floor vibrations on racks
- Analyzing resonance effects
- Evaluating the influence of fatigue and cyclic load
- Identifying sheared/twisted columns
- Measuring deflections in horizontal, diagonal, and lateral braces.
- Underground pipelines
- Storage tanks
- Reinforced concrete structures
- LPG bullets
- Vessels
- Ship hulls
- Other appliances
- Power & Distribution Transformers
- Instrument Transformers
- Transmission Lines
- Cables
- Switchgear, Circuit Breakers, and Gas-Insulated Switchgear (GIS)
- Energy Meters
- Isolators
- Generators/Motors
- Surge Arresters
- Relays
- Battery Banks
- Portable Appliance Testing (PAT)
- C&DF (Capacitance and Dissipation Factor) Test
- Transformer Turn Ratio (TTR) Test
- Leakage Reactance/Short Circuit Test
- Excitation Current/Open Circuit Test
- Winding Resistance Test
- Dielectric Breakdown of Oil & Dissolved Gas Analysis (DGA)
- Sweep Frequency Response Analysis (SFRA)
- Contact Resistance Test for Circuit Breakers, O/C Timing
- Insulation Resistance Test & Polarization Index (PI)/Dielectric Absorption Ratio (DAR)
- Online Radio-Frequency Interference (RFI) & Acoustic Partial Discharge (PD) Test
- Rotor Winding Resistance Test
- Other tests as required
LIFTING EQUIPMENT / LIFTING ACCESSORIES / LOOSE GEAR
- Cranes (Tower, Mobile, Overhead, Pipe layer, Pedestal, Loader Cranes, etc.)
- Runway Beams, Monorails, All Pad Eyes, Gin Poles & Gin Wheels
- Winches, Hoists (air and electric), Crabs, Hoists
- Chain / Lever Blocks, Wire Rope Pulling Machines, Pull Lifts, Trolleys
- Mobile Elevating Working Platforms (MEWP)
- Elevators and Escalators
- Industrial lift trucks, such as Forklifts, Self Loader and Side booms
- Lifting Jacks (Pneumatic, Hydraulic and Mechanical type)
- Loose lifting gears, such as Slings, Shackles, Belts, Eyebolts, Turnbuckles, etc.
- Stay Wire Tension Measurement
- Pre – Shipment Inspection
MANUFACTURING GOODS INSPECTION
Fabricated Metal Components and Products:
- Inspection of metal components and fabricated products, including sheet metal, structural steel, castings, forgings, and machined parts.
- Verification of dimensional accuracy, material composition, surface finish, welding quality, and compliance with industry standards.
Molded Polymers and Composites:
- Inspection of molded plastic and composite products, such as injection-molded parts, extruded profiles, and composite structures.
- Evaluation of product quality, dimensional accuracy, material properties, and adherence to specifications.
Electrical and Electronic Products:
- Inspection of electrical and electronic devices, including consumer electronics, appliances, control panels, and circuit boards.
- Verification of functionality, electrical safety, compliance with relevant standards and regulations, and proper labeling.
Textiles and Textile Products:
- Inspection of textiles, fabrics, garments, and textile-based products, including apparel, home furnishings, and technical textiles.
- Evaluation of fabric quality, color fastness, seam strength, dimensional stability, fiber composition, and compliance with industry standards.
Footwear:
- Inspection of footwear manufacturing processes, including design, material selection, construction, and quality control.
- Evaluation of comfort, durability, fit, adhesion, sole integrity, and compliance with industry standards and safety regulations.
Toy & Nursery Products:
- Inspection of toys, nursery items, and children’s products to ensure safety, quality, and compliance with relevant regulations and standards.
- Assessment of choking hazards, sharp edges, small parts, chemical content, flammability, and adherence to product safety guidelines.
Automotives and Components:
- Inspection of automotive vehicles, including cars, trucks, motorcycles, and recreational vehicles.
General Manufactured Products:
- Inspection of a wide range of general manufactured products not covered in specific categories.
- This includes items such as machinery, tools, appliances, consumer goods, household products, furniture, and industrial equipment.
- Verification of product quality, functionality, durability, and adherence to industry standards and specifications.
- Assessment of safety features, proper labeling, compliance with relevant regulations, and user instructions.
HEALTH, ENVIRONMENT & SAFETY INSPECTION
- Assessment of safety protocols and procedures in the workplace.
- Inspection of safety equipment and personal protective gear.
- Identification of potential hazards and risks in the working environment.
- Evaluation of emergency response plans and evacuation procedures.
- Monitoring compliance with environmental regulations and permits.
- Inspection of waste management practices and hazardous material handling.
- Assessment of air and water quality control measures.
- Verification of environmental impact assessment and mitigation measures.
- Inspection of fire prevention measures and firefighting equipment.
- Evaluation of fire alarm systems and emergency exits.
- Checking compliance with fire safety codes and standards.
- Verification of electrical systems and wiring for safety compliance.
- Inspection of electrical equipment and grounding measures.
- Assessment of electrical hazard identification and control.
- Evaluation of safety measures in industrial processes and operations.
- Inspection of equipment integrity and compliance with safety standards.
- Verification of safety interlocks and emergency shutdown systems.
- Examination of health and wellness programs for employees.
- Assessment of ergonomic conditions and workplace design.
- Monitoring of exposure to hazardous substances and noise levels.
- Inspection of construction sites for adherence to safety regulations.
- Verification of scaffolding, fall protection, and excavation safety measures.
- Assessment of equipment and machinery safety during construction activities.
- Inspection of storage facilities for hazardous materials and chemicals.
- Evaluation of containment measures and spill response protocols.
- Verification of proper labeling and handling procedures.
- Inspection of transportation vehicles for safety compliance.
- Assessment of driver qualifications and training programs.
- Verification of cargo handling and transportation safety measures.
- Evaluation of the adequacy and proper use of personal protective equipment.
- Inspection of PPE maintenance and replacement procedures.
